Total storage in 1U rack space:
96.0TB-120.0TB RAID combines Fibre, SAS 12.0Gb/s and iSCSI storage technologies with 2x16GB/sec or 4x8GB/sec, Fibre Channel Speed and data protection with iSCSI controller access to same data over TC/IP network in a
1U rack-optimized enclosure.
The innovative GVS-designed Nomadic 1U RAID architecture combines affordable, high-capacity SAS 12Gb/sec 6Gb/sec drive technology with a single to dual controller host channel interface for redundancy, fast,
reliable data access. Each GVS Drive Module uses
a dedicated 6.0Gb/s drive channel, maximizing
the 800MB/s Fibre Channel host connection.
4880C Controller RAID features:
RAID level 0, 1, 1E, 3, 5, 6, 10, 50, 61, 65, 100 Single Disk or JBOD
Multiple RAID selection
12(8) independent logical arrays configurations per controller
Online array roaming
Offline RAID set
Online RAID level/stripe size migration
Online volume set growth
Support global hot spare and dedicated hot spare
Instant availability and background initialization
Automatic drive insertion / removal detection and rebuilding
Greater than 2TB per volume set (64-bit LBA support)
Greater than 2TB per disk drive
Each logical array can have an independent
RAID level
Write back and write through cache selection
Variable stripe size
LUN slicing
Online RAID group capacity expansion
Drive hot-swapping
Intelligent Drive Management
Battery backup support
Disk scrubbing/ array verify scheduling for automatic repair of all configured RAID sets
Login record in the event log with IP address and service (http, telnet and serial)
Support intelligent power management to save energy and extend service life
Support NTP protocol to synchronize RAID controller clock over the on-board LAN port
Redundant controller operation with active/active and failover/failback function
Dual-active RAID controller with cache mirroring through dedicated high speed bus
Automatic synchronization of firmware version in the dual-active mode
Multi-path & load-balancing support (Microsoft MPIO)
Support for multiple RAID sets, multiple hosts and LUN masking and mapping
Max 122 devices
Max 128 LUNs (volume set) per controller
Management:
GVS View management software for all major platforms via Ethernet port
Event notification via an independent GVSView client utility
Field-upgradeable firmware in flash ROM
Firmware-embedded manager via RS-232 port
Firmware-embedded Web Browser-based RAID manager - Access your RAID subsystem from any standard internet browser via 10/100 Lan port
Firmware-embedded SMTP manager monitors all system events and user can select either single or multiple user notifications to be sent via e-mails
Firmware-embedded SNMP agent allows remote to monitor events via 10/100/1000 LAN with no SNMP agent required
Access terminal menu by telnet via 10/100/1000 LAN port
API library for customer to write its own monitor utility
SAP management feature to easily manage multiple RAID units in the networke
|
Host Interface to the Fibre storage:
Two, or four 8GB Fibre Channel ports (SFP), 8Gbit/sec throughput per channel
Thunderbolt and Fibre Channel ports (SFP)(Opt)
4x Gigabit iSCSI host (Opt)
Guaranteed delivery (1,600MB/s full duplex) per channel max 6.4Gbit/sec
Support for point-to-point, loop and fabric (switched) topologies
1000BASE-T Ethernet for remote management
Support read/write per port or read only true
Short-Haul Transceiver (supports up to 500m with 50/125 m MMF)
Long-Haul Transceiver (supports up to 10km with 9/125 m SMF)
RAID Controller specifications:
2GB and 8GB cache per controller up to 8GBmax
Thunderbolt 10Gbit Interface (opt):
Provide Thunderbolt port connection to high speed RAID storage w/Thunderbolt interface and Optional Fibre interface to same volume.
iSCSI Host Interface (opt):
Provide 4x1Gigabit or 10Gigabit iSCSI Ethernet port connects to LAN to high speed RAID storage w/iSCSI.
Battery Backup Module:
Smart battery backup module, integrated lithium cells. With one fully charged battery module used for each cached data protection during power failure.
Material:
Heavy-duty cold-rolled steel
Inside:
Zinc-plated with bright chromate
Outside:
Top cover anodized for better cooling
Cooling:
Rear: 4 x 60x 38mm fans
Self-regulating speeds and front-to-back cooling
Optional: Front security door locking, noise reduction and air filter
Expansion:
12 hotswap SAS 6Gb/sec drive bay with up to
8 x LC FC Interface, or iSCSI and 4xSAS expansion 128 drive support per single SAS expansion port
Controls:
Power secure lock key for on/off and system
reset + serial port + RJ45 + 4 FC LC or iSCSI + SATA and SAS with SAS expansion port
Indicators:
LCD Out-of-Band, RS-232, LAN, and Fibre Channel
Operating System:
OS Independent
|
Drive Bay:
Hotswap 12x SAS 6Gb/sec
Optional SAS or SATA Drive can be mixed
Drive Option:
N2S0852- Nomadic 1U SAS 12Gb/sec 8TB, 128MB cache
N1S07082- Nomadic 1U SAS 6Gb/sec 10TB,
Temperature:
5°C to 45°C (41°F to 113°F)
Storage temperature: -40° to 47°C (-40°F to
116°F)
Humidity:
Operation mode : 5% to 75%
Non-operation mode : 5% to 95% non-condensing
Altitude:
Sea level to 10,000 ft.
Maximum thermal output: 1465 BTUs per hour
Power Supply:
400W 2x400W hot-swap Redundant load-sharing hot-swap power supplies
Min 1x400W module w/ 12 Drive and Dual Controller support
Each 400W Module run Max 40A
Max 4x Universal input (100V to 240V AC),
power factor corrected
Frequency: 47Hz to 63Hz, single phase 8-4A
Power Consumption:
Min: 90W Max: 106W tolerance : ±5%
Dimension:
D22” (558.80mm) X W17.125” (434.98) X H1.75” (44.45mm)
With Front Locking Face Option D23.25” (590.55mm) X W17.125” (180.98) X H1.75” (44.45mm)
Weight:
39lb (17.70 kg) with dual redundant power supply. With packaging 27lb (12.25 kg) |